Nikwax TX.Direct® Wash-In 1L.

The Nikwax TX.Direct® Wash-In is a wash-in waterproofing for wet weather clothing.

It adds water-repellency, revives breathability and reduces water absorbency without tumble drying.

The TX.Direct® Wash-In prolongs the life of wet weather clothing and optimises it’s outdoor performance keeping you warmer and dryer for longer.

It is easy to apply and can be used in a washing machine, no tumble drying required, it will not affect cosmetic appearance and is water based making it environmentally friendly, biodegradable, non flammable, non hazardous.

It can be used for handwashing or in a machine wash and is recommended to be used on jackets, trousers, sleeping bags, Gore-Tex®, Sympatex®, eVent®, Nikwax Analogy® and all other waterproof fabrics.

How To Use In A Washing Machine:

For best results remove all non-washable parts and always clean item(s) first with Nikwax Tech Wash® in a separate wash cycle. No need to dry item(s) before waterproofing. Shake well before use. Follow care label instructions.

• Remove all detergent build up from the detergent dispenser.
• Place maximum of 2 clean garments in washing machine.
• Use 100ml per garment.
• Run 30°C synthetic cycle and slow spin.
• Do not machine-wash garments if taped seams have become dislodged.*
• To maintain waterproofing always wash with Nikwax Tech Wash®. Do not use detergents.

*Faulty taped seams sometimes become detached on old or worn garments. They can be re-stuck using a proprietary clear glue after waterproofing and drying.

How To Use If Handwashing:

Use gloves

• Immerse 1 clean garment in 6L of hand-hot water in a bowl or sink.
• Add 50ml of TX.Direct®.
• Agitate to mix, leave to soak for 5-10 minutes, then agitate thoroughly
• Rinse with cold water until water runs clear.
• Nikwax TX.Direct® treated clothing needs no heat to develop Durable Water Repellency (DWR).
• Air dry or tumble on a low setting if care label allows.